Sunday, 24 January 2021

Companionway Hood & Slide | Fibreglass

The starboard rub rail was left to cure, and work continued on the companionway.

It was time to cover the hood and the slide with fibreglass.

Here is the hood with a single piece of 'glass laid out to cover the top, sides and front.


And this is the slide. It needed two panels due to the trim being in the way at the rear face.


As usual I made paper patterns to cut the 'glass panels accurately.

This is the hood, wetted out with resin.


And similarly this is the slide.


Looking quite nice!


No comments:

Post a comment