Wednesday 15 July 2020

Seatback Frame | Cabin Wall Sister Cleats

In a previous post I mentioned that the seatback support cleats on the rear cabin wall were not substantial enough, and would need to be sistered.

It was a straightforward task. I made each sister cleat in two parts, partly because I had some short lengths of scrap cleat material and partly because I would not have to scrap a whole cleat if I messed up a bevel.

Here is the starboard sister cleat in place.


   
And here is the port sister cleat.



Now we have a really strong and wide ledge for the seatback panels to land on. Much better!

No comments:

Post a Comment