It would soon be time to cover the upper hull in fibreglass cloth, so in anticipation of this I rounded over the edges of all the panels.
A sanding block and a piece of P80 grit sandpaper proved sufficient to the task. I sanded until the round over looked as if a sheet of 'glass cloth would wrap smoothly round it, and no more.
Here is the port Dorade box, viewed from the bow.
And this is the starboard seatback where it meets the rear cabin wall and the cabin roof.
And lastly here is a view of the forward deck topside panel on the port side.
That was quick and easy, for a change!