Monday, 12 October 2020

Transom Skirt Fillet

I had been putting off making a fillet across the transom where it is joined to the transom skirt.

But now I had to do it, so I could move on to other more enjoyable things.

I knew the first application would turn out horrible, and it did. Here it is.


Absolutely awful. So I got out the drill and a carbide burr, and dressed it to remove most of the rough stuff.

It looked a little better.


Finally, I sanded it some more and taped it up for the second layer which will turn it into a much more respectable fillet. Like this.


That's it for now!


No comments:

Post a comment