Companionway Hood & Slide | More Gloss

The interior of the companionway hood was to be painted before installation, so it had been primed and sanded before being glossed.

Here it is after four coats of Ivory White.

I painted the outside of the slide at the same time, while the rollers and brushes were out and to save a bit of time later.

Here it is, again after four coats.

My plan is to use ten coats of gloss on all of the upper hull, because that's what gave the best results on the underside for both blue and white paint.

The inside of the hood will require very little finishing though, because most of it will be out of sight when fitted.