Saturday 28 May 2022

Transom | Touching Up The Frame

As expected the blue and white frame around the transom needed to be cleaned up where it overlapped onto the sides and bottom of the hull.

First I taped off the white sections of the frame and wet sanded them to get an even surface on the overlaps, and then applied more gloss to tidy things up.

Like this.


That doesn't look too bad at all.

I then did the same thing to the blue sections.

This is what the frame looked like when I pulled the masking tape. 


It's not perfect but it's good enough, and it looks great.

No comments:

Post a Comment