The Eynsham PocketShip
Friday, 2 July 2021
Mast | Gluing In The Front Stave
The front of the mast was ready to be glued in place, so I made sure all the clamps used for the test fit were to hand. As here.
Glue was applied and the front piece fitted and clamped and left to cure, like this.
Fingers crossed that it turns out well this time! It should do, and like the rudder I actually think the mast is a bit better structurally for a partial rebuild.
July 02, 2021
Share to Twitter
Share to Facebook
Share to Pinterest
Post a Comment
Post Comments (Atom)