As described in a previous post, I sanded through to the substrate in places when sanding the primer on the upper hull to get it ready for gloss.
This is what the cockpit looked like when I had marked each bare patch with tape, and applied several coats of primer.
And this is the rudder, similarly marked.
I used P240 finishing paper to sand the the patches. It has a cloth backing so is very soft and flexible when sanding rounded or contoured surfaces.
This is it.
It can be easily torn into suitably sized pieces, like this.
This is the cockpit after all the touch ups had been finished.
And this is the rudder.
Amazingly, the hull is just about ready for gloss paint!
No comments:
Post a Comment