Only the new lower drop board and the tabernacle remained to be sanded in readiness for gloss.
That feels really good to know - we must be near the end!
The usual method was used, with a P180 grit to remove brush marks followed by a P220 to polish to a smooth finish.
This is the lower drop board being worked on.
After sanding I wash the surface with water to remove the dust and dry it with a small hair dryer. This technique instantly reveals any residual brush marks.
The tabernacle followed. Here it is.
The inside faces had to be done by hand, but they turned out OK.
Next step is touching up all the bare patches and painting inside the seatback lockers.
We certainly are getting there!
No comments:
Post a Comment