When the white primer was fully dry I pulled the masking tape to see how much grey primer would need to be touched up where I had sanded through it.
It did need some work, but not a repaint as with the white primer.
I taped up some small patches on the edges of the boot top stripe and touched them up with grey primer. This is what it looked like.
This is what the transom looked like after the masking tape had been pulled.
We are now ready for gloss paint!
I decided to apply the white first and taped and masked off the grey primer accordingly.
This is what the boat now looked like on the starboard quarter.
And here is the view from the front.
It feels like we are close to finishing the bottom of the hull!
No comments:
Post a Comment