Saturday, 13 July 2024

Paint Update | Bad News (Again...)

As mentioned in a previous post I glossed the companionway drop boards at the same time as the centreboard, so they were finished.

I did this because I wanted to test the latest paint job for resilience, the white paint having blistered the first time round.

So I put the drop boards outside, resting on the trailer. Here they are.


I thought no more about them, not seriously expecting  any problems due to the extreme care I had taken to paint them in accordance with the paint manufacturer's instructions on which brushes, rollers and thinners to use.

So imagine my dismay when I checked them a week or so later and found ... micro blisters.

The blisters appeared where water (rain) had lain on the upper surface of the boards. Exactly the same as the first time round.

I informed the paint manufacturer and they asked me to send them the boards, so I sent the lower board which was the worst affected.

This is the paint in question.


I really don't know what to do now.

I can't risk painting the boat again only to find that it blisters as soon as we put it outside on its trailer.

I will wait to see what the manufacturer says, but my mind is pretty well made up that I will switch to a different paint.

I hear great things about Epifanes, so I will give that a try with another test.

Journey has temporarily become something of an Ordeal.

2 comments:

  1. Stephen, can’t believe this has happed again after all the care you took to comply with manufacture instructions. Hope you get to root cause soon. If Teamac can’t figure it out then a change of paint manufacturer would appear to be the best way forward. I used the same paint as you on my Tenderly without any issues but I also use Epifanes varnish and that is really good

    ReplyDelete
  2. Thanks John. It's a real conundrum. I've got some Epifanes primer and gloss and will give that a try. Fingers crossed!

    ReplyDelete