I remembered that I had problems with one of the boom gallows support poles when fitting out the first time round.
It was binding inside the stainless steel support bracket because the hole through the seatback top was too tight and needed to be reamed out slightly and resealed.
However, I could not recall if I had actually done that!
So a test fit was necessary before we started painting again.
The brackets were dry fitted and the poles inserted. All was well. Here they are, in place.
I made sure that all the parts were fitted in the same places that they were first installed by labelling them. As here.
That's one less thing to worry about …
No comments:
Post a Comment